Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1993 Audi S4Coolant Type & Capacity
OEM spec from the factory service manual for the 2.2 P variant.
Quick Answer
Coolant Type
50/50 mixture of Ethylene Glycol Antifreeze and water
Capacity
2.40 GALS.
9.08 L
Variant
2.2 P
Note: Use Phosphate-free Antifreeze.
This vehicle's factory manual
1993 Audi S4: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Other specs:All specs
What You'll Need
Related for Your 1993 Audi S4
Quick Actions
Frequently Asked Questions
- What type of coolant does a 1993 Audi S4 take?
- The 1993 Audi S4 requires 50/50 mixture of Ethylene Glycol Antifreeze and water. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the 2.2 P configuration.
- How much coolant does a 1993 Audi S4 hold?
- The 1993 Audi S4 cooling system capacity is 2.40 GALS. (9.08 L).
- Can I use universal coolant in my 1993 Audi S4?
- It is strongly recommended to use coolant that meets the 50/50 mixture of Ethylene Glycol Antifreeze and water specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 1993 Audi S4?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.