Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1992 Jaguar XjsOil Type & Capacity
OEM spec from the factory service manual for the 2D Convertible variant.
Quick Answer
Oil Type
$API - SAE 5W-20/30/40 (Below 14Deg.F), 5W-50 (-25Deg.F to 110Deg.F), 10W-30/40/50/60 (-4Deg.F to 110Deg.F), 15W-40/50, 20W-40/50 (14Deg.F and Above)
Capacity (w/ Filter)
10.50 QTS.
9.93 L
Variant
2D Convertible
This vehicle's factory manual
1992 Jaguar Xjs: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
What You'll Need
Engine Oil
$API - SAE 5W-20/30/40 (Below 14Deg.F), 5W-50 (-25Deg.F to 110Deg.F), 10W-30/40/50/60 (-4Deg.F to 110Deg.F), 15W-40/50, 20W-40/50 (14Deg.F and Above) for Jaguar Xjs
Search Amazon β
Oil Filter
Jaguar Xjs Oil Filter
Search Amazon β
Tool
Oil Filter Wrench
Search Amazon β
Kit
Funnel + Drain Pan Kit
Search Amazon β
Related for Your 1992 Jaguar Xjs
Frequently Asked Questions
- What type of oil does a 1992 Jaguar Xjs take?
- The 1992 Jaguar Xjs requires API - SAE 5W-20/30/40 (Below 14Deg.F), 5W-50 (-25Deg.F to 110Deg.F), 10W-30/40/50/60 (-4Deg.F to 110Deg.F), 15W-40/50, 20W-40/50 (14Deg.F and Above). The exact spec may vary slightly by engine variant β this page shows the OEM recommendation for the 2D Convertible configuration.
- How much oil does a 1992 Jaguar Xjs need?
- The 1992 Jaguar Xjs takes 10.50 QTS. (9.93 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 1992 Jaguar Xjs?
- Yes β synthetic oil that meets the API - SAE 5W-20/30/40 (Below 14Deg.F), 5W-50 (-25Deg.F to 110Deg.F), 10W-30/40/50/60 (-4Deg.F to 110Deg.F), 15W-40/50, 20W-40/50 (14Deg.F and Above) specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 1992 Jaguar Xjs?
- Using oil that does not meet the API - SAE 5W-20/30/40 (Below 14Deg.F), 5W-50 (-25Deg.F to 110Deg.F), 10W-30/40/50/60 (-4Deg.F to 110Deg.F), 15W-40/50, 20W-40/50 (14Deg.F and Above) specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.
