Ford Mustang Fluid Capacities
Factory manual fluid capacities for the Ford Mustang. Exact capacities and specs extracted from the LEMON service manual archive.
Last updated: 2026-11-08 • Reading time: 8 min • By AllOEMManuals Editorial Team
Quick Answer
2024 Ford Mustang: 3.40 OZS. (0.1 L) — PAG Oil/ YN-35 Note: Approximate capacity.
| Generation | Years | Top spec |
|---|---|---|
| 2024 | 2024 | 3.40 OZS. (0.1 L) — PAG Oil/ YN-35 Note: Approximate capacity. |
| 2023 | 2023 | 3.40 OZS. (0.1 L) — PAG Oil/ YN-35 Note: Approximate capacity. |
| 2022 | 2022 | 3.40 OZS. (0.1 L) — PAG Oil/ YN-35 Note: Approximate capacity. |
This vehicle's factory manual
Ford Mustang: choose your year, then confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Ford Mustang maintenance schedule
Check fluid capacities information for your Ford Mustang
2024 Ford Mustang: 3.40 OZS. (0.1 L) — PAG Oil/ YN-35 Note: Approximate capacity.
Fluid type and capacity can change by engine, drivetrain, and transmission. Verify the exact branch before filling anything. Once the spec is confirmed, use the supplies and purchase links below to build the full one-trip shopping list before you start the repair.
Find Your Vehicle
Choose your year, model and configuration before using a specification or ordering parts. The example source may describe a different vehicle or trim.
2024
- →Approximate capacity.
- →Ford recommends using Motorcraft (Ford) DOT 4 LV High Performance Motor Vehicle Brake Fluid or equivalent meeting WSS-M6C65-A2. Fill between "max" and "min" lines on reservoir.
- →SAE 0W-30 oil may be used in cold temperature operations: In an area of extreme cold, where the temperature falls below -29Deg.C (-20Deg.F).
2023
- →Approximate capacity.
- →Ford recommends using Motorcraft (Ford) DOT 4 LV High Performance Motor Vehicle Brake Fluid or equivalent meeting WSS-M6C65-A2. Fill between "max" and "min" lines on reservoir.
- →SAE 0W-30 oil may be used in cold temperature operations: In an area of extreme cold, where the temperature falls below -29Deg.C (-20Deg.F).
2022
- →Approximate capacity.
- →Ford recommends using Motorcraft (Ford) DOT 4 LV High Performance Motor Vehicle Brake Fluid or equivalent meeting WSS-M6C65-A2. Fill between "max" and "min" lines on reservoir.
- →For complete refill of our limited slip axles, add 3.28 fl oz (97 ml) of Additive Friction Modifier XL-3 or equivalent meeting specification EST-M2C118-A. Include this friction modifier in the total fluid capacity. Our rear axles contain a synthetic lubricant that does not require changing unless you submerge the axle in water.
- →SAE 0W-30 oil may be used in cold temperature operations: In an area of extreme cold, where the temperature falls below -29Deg.C (-20Deg.F).
- →For complete refill of limited slip Ford axles, add 4.0 oz. (118 ml) of Additive Friction Modifier XL-3 or equivalent meeting Ford Specification EST-M2C118-A.
- →SAE 0W-40 oil may be used to improve engine cold start performance and in extremely cold climates, where the ambient temperature reaches -22.0°F (-30°C) or below.
2021
- →Approximate capacity.
- →Approximate dry capacity, includes cooler and tubes.
- →Ford recommends using Motorcraft (Ford) DOT 4 LV High Performance Motor Vehicle Brake Fluid or equivalent meeting WSS-M6C65-A2. Fill between "max" and "min" lines on reservoir.
- →Add 4 oz. of Additive Friction Modifier XL-3 or equivalent meeting FORD Specification: (EST-M2C118-A) for a complete refill of Traction-Lok rear axle.
- →SAE 0W-30 oil may be used in cold temperature operations: In an area of extreme cold, where the temperature falls below -29Deg.C (-20Deg.F).
- →SAE 0W-40 oil may be used to improve engine cold start performance and in extremely cold climates, where the ambient temperature reaches -22.0°F (-30°C) or below.
2020
- →Approximate capacity.
- →Approximate dry capacity, includes cooler and tubes.
- →Ford recommends using Motorcraft (Ford) DOT 4 LV High Performance Motor Vehicle Brake Fluid or equivalent meeting WSS-M6C65-A2. Fill between "max" and "min" lines on reservoir.
- →Add 4 oz. of Additive Friction Modifier XL-3 or equivalent meeting FORD Specification: (EST-M2C118-A) for a complete refill of Traction-Lok rear axle.
- →SAE 0W-20 is the best choice for good fuel economy and good starting in cold weather. Motor Oil for track use: SAE 5W-30 Premium Synthetic Blend Motor Oil.
- →SAE 0W-40 oil may be used to improve engine cold start performance and in extremely cold climates, where the ambient temperature reaches -22.0°F (-30°C) or below.
2019
- →Approximate capacity.
- →Approximate dry capacity, includes cooler and tubes.
- →Ford recommends using Motorcraft (Ford) DOT 4 LV High Performance Motor Vehicle Brake Fluid or equivalent meeting WSS-M6C65-A2. Fill between "max" and "min" lines on reservoir.
- →Add 4 oz. of Additive Friction Modifier XL-3 or equivalent meeting FORD Specification: (EST-M2C118-A) for a complete refill of Traction-Lok rear axle.
- →Add the coolant type originally equipped in the vehicle. Indicates only approximate dry fill capacity. Some applications may vary.
- →SAE 0W-20 is the best choice for good fuel economy and good starting in cold weather. Motor Oil for track use: SAE 5W-30 Premium Synthetic Blend Motor Oil.
- →SAE 0W-40 oil may be used to improve engine cold start performance and in extremely cold climates, where the ambient temperature reaches -22.0°F (-30°C) or below.
2018
- →Approximate dry capacity, includes cooler and tubes.
- →Ford recommends using Motorcraft (Ford) DOT 4 LV High Performance Motor Vehicle Brake Fluid or equivalent meeting WSS-M6C65-A2. Fill between "max" and "min" lines on reservoir.
- →Add 4 oz. of Additive Friction Modifier XL-3 or equivalent meeting FORD Specification: (EST-M2C118-A) for a complete refill of Traction-Lok rear axle.
- →Add the coolant type originally equipped in the vehicle. Indicates only approximate dry fill capacity. Some applications may vary.
- →SAE 0W-20 is the best choice for good fuel economy and good starting in cold weather.
- →Approximate capacity.
2016-2017
- →Approximate dry capacity, includes cooler and tubes. Automatic Transmission that require MERCON LV should only use MERCON LV ATF.
- →Ford recommends using Motorcraft (Ford) DOT 4 LV High Performance Motor Vehicle Brake Fluid or equivalent meeting WSS-M6C65-A2. Fill between "max" and "min" lines on reservoir.
- →Add 4 oz. of Additive Friction Modifier XL-3 or equivalent meeting FORD Specification: (EST-M2C118-A) for a complete refill of Traction-Lok rear axle.
- →Add the coolant type originally equipped in the vehicle. Indicates only approximate dry fill capacity. Some applications may vary.
- →The engine has been designed to use Motorcraft engine oils or equivalent oils that meet Ford specifications. It is also acceptable to use an engine oil of recommended viscosity grade that meets API SN requirements and displays the API certification mark for gasoline engines. DO NOT use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage not covered by your Ford warranty. DO NOT use oils labeled as API SN unless the label also displays the API certification mark. These oils do not meet the requirements of your vehicle’s engine and emissions system.
- →Approximate capacity.
2015
- →Approximate dry capacity, includes cooler and tubes. Automatic Transmission that require MERCON LV should only use MERCON LV ATF.
- →Ford recommends using Motorcraft (Ford) DOT 4 LV High Performance Motor Vehicle Brake Fluid or equivalent meeting WSS-M6C65-A2. Fill between "max" and "min" lines on reservoir.
- →Add 4 oz. of Additive Friction Modifier XL-3 or equivalent meeting FORD Specification: (EST-M2C118-A) for a complete refill of Traction-Lok rear axle.
- →Add the coolant type originally equipped in the vehicle. Indicates only approximate dry fill capacity. Some applications may vary.
- →The engine has been designed to use Motorcraft engine oils or equivalent oils that meet Ford specifications. It is also acceptable to use an engine oil of recommended viscosity grade that meets API SN requirements and displays the API certification mark for gasoline engines. DO NOT use supplemental engine oil additives in your engine. They are unnecessary and could lead to engine damage not covered by your Ford warranty. DO NOT use oils labeled as API SN unless the label also displays the API certification mark. These oils do not meet the requirements of your vehicle’s engine and emissions system.
- →Approximate capacity.
Search for fluids
Choose the fluid you need. Check your vehicle, service procedure and manufacturer specification before buying; search results are not verified matches.
As an Amazon Associate, AllOEMManuals earns from qualifying purchases.
Fluids — Manual's Parts List
Everything for a full fluid service weekend.
- 1Engine OilShop →
Match viscosity to your spec
- 2CoolantShop →
Match color/chemistry — never mix types
- 3Long-Neck FunnelShop →
Transmission and differential fill holes are recessed
- 4Fluid Extraction PumpShop →
Remove old brake fluid from reservoir without mess
- 5Shop RagsShop →
You will need more than you think
Get everything at once
Search results vary; confirm each item and its fitment before buying.
Links go to Amazon via our affiliate store (aiautorepair-20). We earn a small commission at no extra cost to you — it keeps the site running and the data free.
One-Trip Shopping List
Recommended supplies and tools for this job, grouped so you can buy everything before the repair starts.
Fluid Extraction Pump
Cleanly remove old fluids from reservoirs.
Clean Shop Rags
Lint-free rags for cleaning dipsticks and spills.
Multi-Purpose Funnel
Long-neck funnel for hard-to-reach fill points.
Nitrile Gloves
Keep hands clean during multi-fluid maintenance.
Project Essentials
Basic tool sets, gloves, and cleaning supplies for your Ford Mustang so the job is ready when the parts arrive.
Frequently Asked Questions
- Where is this data from?
- Extracted directly from the LEMON factory service manual archive. Sources are cited per generation.
- What fluid capacities does a Ford Mustang use?
- 2024 Ford Mustang: 3.40 OZS. (0.1 L) — PAG Oil/ YN-35 Note: Approximate capacity.
- Why do fluid capacities vary by generation for the Ford Mustang?
- Different engine options, transmission types, and cooling system designs across model years change total fluid volumes. Always use the capacity listed for your exact year and engine code — do not guess across generations.
Find your service manual
Select your vehicle and check the available manual sections for your exact configuration.
Author & Review
Published by AllOEMManuals, founded by Lyndon Bedford, an automotive technician with 20 years of experience. He owned and operated a mechanic shop in Hurst, Texas from 2014 to 2022 and continues hands-on repair work.
Content may combine manual references, general repair templates, and AI-assisted drafting. Confirm the source, vehicle configuration, and applicability before working. Report corrections through our contact page.
Last updated: 2026-11-08
