Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1990 Nissan PulsarOil Type & Capacity
OEM spec from the factory service manual for the Automatic variant.
Quick Answer
Oil Type
$API - SAE 5W-30 (Preferred) (Below -20Deg.F to Above 100Deg.F), 10W-30, 10W-40, (0Deg.F to Above 100Deg.F)
Capacity (w/ Filter)
3.40 QTS.
3.21 L
Variant
Automatic
This vehicle's factory manual
The oil spec is above. This opens the fluids section of the 1990 Nissan Pulsar Automatic factory book.
Sister site: See this spec on WhatTypeOfOil.com — our quick oil type & capacity lookup for every vehicle.
Other specs:All specs
What You'll Need
Related for Your 1990 Nissan Pulsar
Frequently Asked Questions
- What type of oil does a 1990 Nissan Pulsar take?
- The 1990 Nissan Pulsar requires API - SAE 5W-30 (Preferred) (Below -20Deg.F to Above 100Deg.F), 10W-30, 10W-40, (0Deg.F to Above 100Deg.F). The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Automatic configuration.
- How much oil does a 1990 Nissan Pulsar need?
- The 1990 Nissan Pulsar takes 3.40 QTS. (3.21 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 1990 Nissan Pulsar?
- Yes — synthetic oil that meets the API - SAE 5W-30 (Preferred) (Below -20Deg.F to Above 100Deg.F), 10W-30, 10W-40, (0Deg.F to Above 100Deg.F) specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 1990 Nissan Pulsar?
- Using oil that does not meet the API - SAE 5W-30 (Preferred) (Below -20Deg.F to Above 100Deg.F), 10W-30, 10W-40, (0Deg.F to Above 100Deg.F) specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.