Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1990 Land Rover Range RoverOil Type & Capacity
OEM spec from the factory service manual for the Base variant.
Quick Answer
Oil Type
$API - SG, SAE 10W-40 or 10W-50
Capacity (w/ Filter)
7.10 QTS.
6.71 L
Variant
Base
Note: API - SAE 5W-30 oil for winter use.
This vehicle's factory manual
1990 Land Rover Range Rover: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Sister site: See this spec on WhatTypeOfOil.com — our quick oil type & capacity lookup for every vehicle.
What You'll Need
Related for Your 1990 Land Rover Range Rover
Maintenance Specs
Frequently Asked Questions
- What type of oil does a 1990 Land Rover Range Rover take?
- The 1990 Land Rover Range Rover requires API - SG, SAE 10W-40 or 10W-50. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Base configuration.
- How much oil does a 1990 Land Rover Range Rover need?
- The 1990 Land Rover Range Rover takes 7.10 QTS. (6.71 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 1990 Land Rover Range Rover?
- Yes — synthetic oil that meets the API - SG, SAE 10W-40 or 10W-50 specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 1990 Land Rover Range Rover?
- Using oil that does not meet the API - SG, SAE 10W-40 or 10W-50 specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.