Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1990 Geo MetroOil Type & Capacity
OEM spec from the factory service manual for the Base, 2D Hatchback, Automatic variant.
Quick Answer
Oil Type
$SAE 5W-30 (Below -20Deg.F to Above 100Deg.F) (Preferred), 10W-30 (Above 0Deg.F)
Capacity (w/ Filter)
3.70 QTS.
3.5 L
Variant
Base, 2D Hatchback, Automatic
Note: Use oil that has been certified by the American Petroleum Institute.
This vehicle's factory manual
1990 Geo Metro: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Sister site: See this spec on WhatTypeOfOil.com — our quick oil type & capacity lookup for every vehicle.
Other specs:All specs
What You'll Need
Related for Your 1990 Geo Metro
Quick Actions
Frequently Asked Questions
- What type of oil does a 1990 Geo Metro take?
- The 1990 Geo Metro requires SAE 5W-30 (Below -20Deg.F to Above 100Deg.F) (Preferred), 10W-30 (Above 0Deg.F). The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Base, 2D Hatchback, Automatic configuration.
- How much oil does a 1990 Geo Metro need?
- The 1990 Geo Metro takes 3.70 QTS. (3.5 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 1990 Geo Metro?
- Yes — synthetic oil that meets the SAE 5W-30 (Below -20Deg.F to Above 100Deg.F) (Preferred), 10W-30 (Above 0Deg.F) specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 1990 Geo Metro?
- Using oil that does not meet the SAE 5W-30 (Below -20Deg.F to Above 100Deg.F) (Preferred), 10W-30 (Above 0Deg.F) specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.