Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1990 Audi 200Oil Type & Capacity
OEM spec from the factory service manual for the Base, Automatic variant.
Quick Answer
Oil Type
$API - SAE 5W-20/30 (Below -15Deg.F to 20Deg.F), 10W-30/40 (-5Deg.F to 65Deg.F), 15W-40/50 (10Deg.F to Above 85Deg.F), 20W-40/50 (15Deg.F to Above 85Deg.F)
Capacity (w/ Filter)
5.00 QTS.
4.73 L
Variant
Base, Automatic
This vehicle's factory manual
The oil spec is above. This opens the fluids section of the 1990 Audi 200 Base, Automatic factory book.
What You'll Need
Engine Oil
$API - SAE 5W-20/30 (Below -15Deg.F to 20Deg.F), 10W-30/40 (-5Deg.F to 65Deg.F), 15W-40/50 (10Deg.F to Above 85Deg.F), 20W-40/50 (15Deg.F to Above 85Deg.F) for Audi 200
Search Amazon →
Oil Filter
Audi 200 Oil Filter
Search Amazon →
Tool
Oil Filter Wrench
Search Amazon →
Kit
Funnel + Drain Pan Kit
Search Amazon →
Related for Your 1990 Audi 200
Quick Actions
Frequently Asked Questions
- What type of oil does a 1990 Audi 200 take?
- The 1990 Audi 200 requires API - SAE 5W-20/30 (Below -15Deg.F to 20Deg.F), 10W-30/40 (-5Deg.F to 65Deg.F), 15W-40/50 (10Deg.F to Above 85Deg.F), 20W-40/50 (15Deg.F to Above 85Deg.F). The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Base, Automatic configuration.
- How much oil does a 1990 Audi 200 need?
- The 1990 Audi 200 takes 5.00 QTS. (4.73 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 1990 Audi 200?
- Yes — synthetic oil that meets the API - SAE 5W-20/30 (Below -15Deg.F to 20Deg.F), 10W-30/40 (-5Deg.F to 65Deg.F), 15W-40/50 (10Deg.F to Above 85Deg.F), 20W-40/50 (15Deg.F to Above 85Deg.F) specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 1990 Audi 200?
- Using oil that does not meet the API - SAE 5W-20/30 (Below -15Deg.F to 20Deg.F), 10W-30/40 (-5Deg.F to 65Deg.F), 15W-40/50 (10Deg.F to Above 85Deg.F), 20W-40/50 (15Deg.F to Above 85Deg.F) specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.