Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1989 Volvo 240Oil Type & Capacity
OEM spec from the factory service manual for the DL, 4D Sedan, Automatic, AW70 variant.
Quick Answer
Oil Type
SAE 10W-30 (-4Deg.F to Above 104Deg.F) Preferred. Oils with designation SF/CC & SF/CD comply with these demands.
Capacity (w/ Filter)
4.00 QTS.
3.78 L
Variant
DL, 4D Sedan, Automatic, AW70
Source: Factory service manual — 1989 Volvo 240 DL, 4D Sedan, Automatic, AW70. View full manual section →
What You'll Need
Frequently Asked Questions
- What type of oil does a 1989 Volvo 240 take?
- The 1989 Volvo 240 requires SAE 10W-30 (-4Deg.F to Above 104Deg.F) Preferred. Oils with designation SF/CC & SF/CD comply with these demands.. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the DL, 4D Sedan, Automatic, AW70 configuration.
- How much oil does a 1989 Volvo 240 need?
- The 1989 Volvo 240 takes 4.00 QTS. (3.78 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 1989 Volvo 240?
- Yes — synthetic oil that meets the SAE 10W-30 (-4Deg.F to Above 104Deg.F) Preferred. Oils with designation SF/CC & SF/CD comply with these demands. specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 1989 Volvo 240?
- Using oil that does not meet the SAE 10W-30 (-4Deg.F to Above 104Deg.F) Preferred. Oils with designation SF/CC & SF/CD comply with these demands. specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.