Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1989 Subaru Xt6Coolant Type & Capacity
OEM spec from the factory service manual for the 2.7 8 variant.
Quick Answer
Coolant Type
Anti-freeze and Anticorrosive Ethylene-Glycol Coolant
Capacity
7.40 QTS.
7 L
Variant
2.7 8
This vehicle's factory manual
1989 Subaru Xt6: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Other specs:All specs
What You'll Need
Related for Your 1989 Subaru Xt6
Quick Actions
Frequently Asked Questions
- What type of coolant does a 1989 Subaru Xt6 take?
- The 1989 Subaru Xt6 requires Anti-freeze and Anticorrosive Ethylene-Glycol Coolant. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the 2.7 8 configuration.
- How much coolant does a 1989 Subaru Xt6 hold?
- The 1989 Subaru Xt6 cooling system capacity is 7.40 QTS. (7 L).
- Can I use universal coolant in my 1989 Subaru Xt6?
- It is strongly recommended to use coolant that meets the Anti-freeze and Anticorrosive Ethylene-Glycol Coolant specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 1989 Subaru Xt6?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.