Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1989 Cadillac DeVilleOil Type & Capacity
OEM spec from the factory service manual for the 2D Coupe variant.
Quick Answer
Oil Type
SAE 5W-30 (Below -20Deg.F to 60Deg.F), 10W-30 (Preferred) (0Deg.F to Above 100Deg.F), 15W-40 (10Deg.F to Above 100Deg.F), 30 (40Deg.F to Above 100Deg.F)
Capacity (w/ Filter)
5.50 QTS.
5.2 L
Variant
2D Coupe
Source: Factory service manual — 1989 Cadillac DeVille 2D Coupe. View full manual section →
What You'll Need
Engine Oil
SAE 5W-30 (Below -20Deg.F to 60Deg.F), 10W-30 (Preferred) (0Deg.F to Above 100Deg.F), 15W-40 (10Deg.F to Above 100Deg.F), 30 (40Deg.F to Above 100Deg.F) for Cadillac DeVille
Search Amazon →
Oil Filter
Cadillac DeVille Oil Filter
Search Amazon →
Tool
Oil Filter Wrench
Search Amazon →
Kit
Funnel + Drain Pan Kit
Search Amazon →
Frequently Asked Questions
- What type of oil does a 1989 Cadillac DeVille take?
- The 1989 Cadillac DeVille requires SAE 5W-30 (Below -20Deg.F to 60Deg.F), 10W-30 (Preferred) (0Deg.F to Above 100Deg.F), 15W-40 (10Deg.F to Above 100Deg.F), 30 (40Deg.F to Above 100Deg.F). The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the 2D Coupe configuration.
- How much oil does a 1989 Cadillac DeVille need?
- The 1989 Cadillac DeVille takes 5.50 QTS. (5.2 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 1989 Cadillac DeVille?
- Yes — synthetic oil that meets the SAE 5W-30 (Below -20Deg.F to 60Deg.F), 10W-30 (Preferred) (0Deg.F to Above 100Deg.F), 15W-40 (10Deg.F to Above 100Deg.F), 30 (40Deg.F to Above 100Deg.F) specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 1989 Cadillac DeVille?
- Using oil that does not meet the SAE 5W-30 (Below -20Deg.F to 60Deg.F), 10W-30 (Preferred) (0Deg.F to Above 100Deg.F), 15W-40 (10Deg.F to Above 100Deg.F), 30 (40Deg.F to Above 100Deg.F) specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.