Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1989 Buick SkyhawkOil Type & Capacity
OEM spec from the factory service manual for the Base, 2D Coupe, Automatic variant.
Quick Answer
Oil Type
$SAE 5W-30 (Preferred) (Below -20Deg.F to Above 100Deg.F), 10W-30 (0Deg.F to Above 100Deg.F)
Capacity (w/ Filter)
4.00 QTS.
3.78 L
Variant
Base, 2D Coupe, Automatic
This vehicle's factory manual
1989 Buick Skyhawk: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Sister site: See this spec on WhatTypeOfOil.com — our quick oil type & capacity lookup for every vehicle.
Other specs:All specs
What You'll Need
Related for Your 1989 Buick Skyhawk
Frequently Asked Questions
- What type of oil does a 1989 Buick Skyhawk take?
- The 1989 Buick Skyhawk requires SAE 5W-30 (Preferred) (Below -20Deg.F to Above 100Deg.F), 10W-30 (0Deg.F to Above 100Deg.F). The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Base, 2D Coupe, Automatic configuration.
- How much oil does a 1989 Buick Skyhawk need?
- The 1989 Buick Skyhawk takes 4.00 QTS. (3.78 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 1989 Buick Skyhawk?
- Yes — synthetic oil that meets the SAE 5W-30 (Preferred) (Below -20Deg.F to Above 100Deg.F), 10W-30 (0Deg.F to Above 100Deg.F) specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 1989 Buick Skyhawk?
- Using oil that does not meet the SAE 5W-30 (Preferred) (Below -20Deg.F to Above 100Deg.F), 10W-30 (0Deg.F to Above 100Deg.F) specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.