Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1989 Buick ElectraCoolant Type & Capacity
OEM spec from the factory service manual for the Estate Wagon variant.
Quick Answer
Coolant Type
50/50 mixture of Ethylene Glycol Base Antifreeze and water
Capacity
16.00 QTS.
15.14 L
Variant
Estate Wagon
Note: GM Specification 1825-M.
Source: Factory service manual — 1989 Buick Electra Estate Wagon. View full manual section →
What You'll Need
Frequently Asked Questions
- What type of coolant does a 1989 Buick Electra take?
- The 1989 Buick Electra requires 50/50 mixture of Ethylene Glycol Base Antifreeze and water. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Estate Wagon configuration.
- How much coolant does a 1989 Buick Electra hold?
- The 1989 Buick Electra cooling system capacity is 16.00 QTS. (15.14 L).
- Can I use universal coolant in my 1989 Buick Electra?
- It is strongly recommended to use coolant that meets the 50/50 mixture of Ethylene Glycol Base Antifreeze and water specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 1989 Buick Electra?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.