What type of oil does a 1989 Audi 200 take?

The 1989 Audi 200 requires SAE 5W-20/30 (Below -15Deg.F to 20Deg.F), 10W-30/40 (-5Deg.F to 65Deg.F), 15W-40/50 (10Deg.F to Above 85Deg.F), 20W-40/50 (15Deg.F to Above 85Deg.F). The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Base, Automatic configuration.

How much oil does a 1989 Audi 200 need?

The 1989 Audi 200 takes 5.00 QTS. (4.73 L) of engine oil with the filter replaced.

What happens if I use the wrong oil in my 1989 Audi 200?

Using oil that does not meet the SAE 5W-20/30 (Below -15Deg.F to 20Deg.F), 10W-30/40 (-5Deg.F to 65Deg.F), 15W-40/50 (10Deg.F to Above 85Deg.F), 20W-40/50 (15Deg.F to Above 85Deg.F) specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.

Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

1989 Audi 200Oil Type & Capacity

OEM spec from the factory service manual for the Base, Automatic variant.

Quick Answer

Oil Type

$SAE 5W-20/30 (Below -15Deg.F to 20Deg.F), 10W-30/40 (-5Deg.F to 65Deg.F), 15W-40/50 (10Deg.F to Above 85Deg.F), 20W-40/50 (15Deg.F to Above 85Deg.F)

Capacity (w/ Filter)

5.00 QTS.

4.73 L

Variant

Base, Automatic

Note: Difference between "min" and "max" marks on dipstick is approx. 1.qt.

This vehicle's factory manual

1989 Audi 200: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.

Open this vehicle’s service manual

Sister site: See this spec on WhatTypeOfOil.com — our quick oil type & capacity lookup for every vehicle.

Other specs:All specs

What You'll Need

Engine Oil

$SAE 5W-20/30 (Below -15Deg.F to 20Deg.F), 10W-30/40 (-5Deg.F to 65Deg.F), 15W-40/50 (10Deg.F to Above 85Deg.F), 20W-40/50 (15Deg.F to Above 85Deg.F) for Audi 200

Search Amazon →

Oil Filter

Related for Your 1989 Audi 200

Quick Actions

🏠1989 Audi 200 Hub 🛠️All Repair Guides 🤖AI Diagnosis

Frequently Asked Questions

What type of oil does a 1989 Audi 200 take?: The 1989 Audi 200 requires SAE 5W-20/30 (Below -15Deg.F to 20Deg.F), 10W-30/40 (-5Deg.F to 65Deg.F), 15W-40/50 (10Deg.F to Above 85Deg.F), 20W-40/50 (15Deg.F to Above 85Deg.F). The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Base, Automatic configuration.
How much oil does a 1989 Audi 200 need?: The 1989 Audi 200 takes 5.00 QTS. (4.73 L) of engine oil with the filter replaced.
Can I use synthetic oil in my 1989 Audi 200?: Yes — synthetic oil that meets the SAE 5W-20/30 (Below -15Deg.F to 20Deg.F), 10W-30/40 (-5Deg.F to 65Deg.F), 15W-40/50 (10Deg.F to Above 85Deg.F), 20W-40/50 (15Deg.F to Above 85Deg.F) specification is acceptable and often preferred for better protection and longer change intervals.
What happens if I use the wrong oil in my 1989 Audi 200?: Using oil that does not meet the SAE 5W-20/30 (Below -15Deg.F to 20Deg.F), 10W-30/40 (-5Deg.F to 65Deg.F), 15W-40/50 (10Deg.F to Above 85Deg.F), 20W-40/50 (15Deg.F to Above 85Deg.F) specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.