Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1988 Subaru JustyCoolant Type & Capacity
OEM spec from the factory service manual for the GL, 1.2 7 variant.
Quick Answer
Coolant Type
Anti-freeze and Anticorrosive Ethylene-Glycol Coolant
Capacity
2.96 QTS.
2.8 L
Variant
GL, 1.2 7
This vehicle's factory manual
1988 Subaru Justy: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Other specs:All specs
What You'll Need
Related for Your 1988 Subaru Justy
Frequently Asked Questions
- What type of coolant does a 1988 Subaru Justy take?
- The 1988 Subaru Justy requires Anti-freeze and Anticorrosive Ethylene-Glycol Coolant. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the GL, 1.2 7 configuration.
- How much coolant does a 1988 Subaru Justy hold?
- The 1988 Subaru Justy cooling system capacity is 2.96 QTS. (2.8 L).
- Can I use universal coolant in my 1988 Subaru Justy?
- It is strongly recommended to use coolant that meets the Anti-freeze and Anticorrosive Ethylene-Glycol Coolant specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 1988 Subaru Justy?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.