Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1988 Subaru DlCoolant Type & Capacity
OEM spec from the factory service manual for the 4D Wagon, 1.8 4, Automatic variant.
Quick Answer
Coolant Type
Anti-freeze and Anticorrosive Ethylene-Glycol Coolant
Capacity
5.80 QTS.
5.48 L
Variant
4D Wagon, 1.8 4, Automatic
This vehicle's factory manual
1988 Subaru Dl: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Other specs:All specs
What You'll Need
Related for Your 1988 Subaru Dl
Quick Actions
Frequently Asked Questions
- What type of coolant does a 1988 Subaru Dl take?
- The 1988 Subaru Dl requires Anti-freeze and Anticorrosive Ethylene-Glycol Coolant. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the 4D Wagon, 1.8 4, Automatic configuration.
- How much coolant does a 1988 Subaru Dl hold?
- The 1988 Subaru Dl cooling system capacity is 5.80 QTS. (5.48 L).
- Can I use universal coolant in my 1988 Subaru Dl?
- It is strongly recommended to use coolant that meets the Anti-freeze and Anticorrosive Ethylene-Glycol Coolant specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 1988 Subaru Dl?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.