1987 Volvo 240Oil Type & Capacity

OEM spec from the factory service manual for the DL, 4D Sedan, Automatic, AW70 variant.

Quick Answer

Oil Type

$SAE 10W-30 (-4Deg.F to Above 104Deg.F) Preferred. Oils with designation SF/CC & SF/CD comply with these demands.

Capacity (w/ Filter)

4.00 QTS.

3.78 L

Variant

DL, 4D Sedan, Automatic, AW70

This vehicle's factory manual

1987 Volvo 240: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.

Open this vehicle’s service manual
Sister site: See this spec on WhatTypeOfOil.com β€” our quick oil type & capacity lookup for every vehicle.
Other specs:All specs

Related for Your 1987 Volvo 240

Frequently Asked Questions

What type of oil does a 1987 Volvo 240 take?
The 1987 Volvo 240 requires SAE 10W-30 (-4Deg.F to Above 104Deg.F) Preferred. Oils with designation SF/CC & SF/CD comply with these demands.. The exact spec may vary slightly by engine variant β€” this page shows the OEM recommendation for the DL, 4D Sedan, Automatic, AW70 configuration.
How much oil does a 1987 Volvo 240 need?
The 1987 Volvo 240 takes 4.00 QTS. (3.78 L) of engine oil with the filter replaced.
Can I use synthetic oil in my 1987 Volvo 240?
Yes β€” synthetic oil that meets the SAE 10W-30 (-4Deg.F to Above 104Deg.F) Preferred. Oils with designation SF/CC & SF/CD comply with these demands. specification is acceptable and often preferred for better protection and longer change intervals.
What happens if I use the wrong oil in my 1987 Volvo 240?
Using oil that does not meet the SAE 10W-30 (-4Deg.F to Above 104Deg.F) Preferred. Oils with designation SF/CC & SF/CD comply with these demands. specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.