Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1987 Jeep PickupOil Type & Capacity
OEM spec from the factory service manual for the J10, 4.2 C, Automatic variant.
Quick Answer
Oil Type
$API - SF, SAE 5W-30 (Below 60Deg.F), 10W-30 or 10W-40 (Above 0Deg.F), 20W-40 or 20W-50 (Above 30Deg.F)
Capacity (w/ Filter)
7.00 QTS.
6.62 L
Variant
J10, 4.2 C, Automatic
This vehicle's factory manual
1987 Jeep Pickup: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Sister site: See this spec on WhatTypeOfOil.com — our quick oil type & capacity lookup for every vehicle.
Other specs:All specs
What You'll Need
Related for Your 1987 Jeep Pickup
Frequently Asked Questions
- What type of oil does a 1987 Jeep Pickup take?
- The 1987 Jeep Pickup requires API - SF, SAE 5W-30 (Below 60Deg.F), 10W-30 or 10W-40 (Above 0Deg.F), 20W-40 or 20W-50 (Above 30Deg.F). The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the J10, 4.2 C, Automatic configuration.
- How much oil does a 1987 Jeep Pickup need?
- The 1987 Jeep Pickup takes 7.00 QTS. (6.62 L) of engine oil with the filter replaced.
- Can I use synthetic oil in my 1987 Jeep Pickup?
- Yes — synthetic oil that meets the API - SF, SAE 5W-30 (Below 60Deg.F), 10W-30 or 10W-40 (Above 0Deg.F), 20W-40 or 20W-50 (Above 30Deg.F) specification is acceptable and often preferred for better protection and longer change intervals.
- What happens if I use the wrong oil in my 1987 Jeep Pickup?
- Using oil that does not meet the API - SF, SAE 5W-30 (Below 60Deg.F), 10W-30 or 10W-40 (Above 0Deg.F), 20W-40 or 20W-50 (Above 30Deg.F) specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.