How much oil does a 1986 Mazda Glc need?

The 1986 Mazda Glc takes 3.52 QTS. (3.33 L) of engine oil with the filter replaced.

Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

1986 Mazda GlcOil Type & Capacity

OEM spec from the factory service manual for the Automatic variant.

Quick Answer

Oil Type

$SAE 5W-30(Below -20Deg.F to 35Deg.F) 30(35Deg.F to over 90Deg.F) 40(Below 90Deg.F to over 120Deg.F) 10W-30(Below -10Deg.F to over 85Deg.F) 10W-40, 10W-50(Below -10Deg.F to over 120Deg.F) 20W-40, 20W-50(Below 10Deg.F to over 120Deg.F)SAE

Capacity (w/ Filter)

3.52 QTS.

3.33 L

Variant

Automatic

This vehicle's factory manual

1986 Mazda Glc: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.

Open this vehicle’s service manual

Sister site: See this spec on WhatTypeOfOil.com — our quick oil type & capacity lookup for every vehicle.

Other specs:All specs

What You'll Need

Engine Oil

$SAE 5W-30(Below -20Deg.F to 35Deg.F) 30(35Deg.F to over 90Deg.F) 40(Below 90Deg.F to over 120Deg.F) 10W-30(Below -10Deg.F to over 85Deg.F) 10W-40, 10W-50(Below -10Deg.F to over 120Deg.F) 20W-40, 20W-50(Below 10Deg.F to over 120Deg.F)SAE for Mazda Glc

Search Amazon →

Oil Filter

Related for Your 1986 Mazda Glc

Quick Actions

🏠1986 Mazda Glc Hub 🛠️All Repair Guides 🤖AI Diagnosis

Frequently Asked Questions

What type of oil does a 1986 Mazda Glc take?: The 1986 Mazda Glc requires SAE 5W-30(Below -20Deg.F to 35Deg.F) 30(35Deg.F to over 90Deg.F) 40(Below 90Deg.F to over 120Deg.F) 10W-30(Below -10Deg.F to over 85Deg.F) 10W-40, 10W-50(Below -10Deg.F to over 120Deg.F) 20W-40, 20W-50(Below 10Deg.F to over 120Deg.F)SAE. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Automatic configuration.
How much oil does a 1986 Mazda Glc need?: The 1986 Mazda Glc takes 3.52 QTS. (3.33 L) of engine oil with the filter replaced.
Can I use synthetic oil in my 1986 Mazda Glc?: Yes — synthetic oil that meets the SAE 5W-30(Below -20Deg.F to 35Deg.F) 30(35Deg.F to over 90Deg.F) 40(Below 90Deg.F to over 120Deg.F) 10W-30(Below -10Deg.F to over 85Deg.F) 10W-40, 10W-50(Below -10Deg.F to over 120Deg.F) 20W-40, 20W-50(Below 10Deg.F to over 120Deg.F)SAE specification is acceptable and often preferred for better protection and longer change intervals.
What happens if I use the wrong oil in my 1986 Mazda Glc?: Using oil that does not meet the SAE 5W-30(Below -20Deg.F to 35Deg.F) 30(35Deg.F to over 90Deg.F) 40(Below 90Deg.F to over 120Deg.F) 10W-30(Below -10Deg.F to over 85Deg.F) 10W-40, 10W-50(Below -10Deg.F to over 120Deg.F) 20W-40, 20W-50(Below 10Deg.F to over 120Deg.F)SAE specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.