How much coolant does a 1985 Dodge Conquest hold?

The 1985 Dodge Conquest cooling system capacity is 9.50 QTS. (8.99 L).

What happens if I use the wrong coolant in my 1985 Dodge Conquest?

Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.

Safety Warning

DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.

1985 Dodge ConquestCoolant Type & Capacity

OEM spec from the factory service manual for the 2.6 H, Automatic variant.

Quick Answer

Coolant Type

50/50 mixture of water and Ethylene-Glycol Base Antifreeze, such as MOPAR, PRESTON II, PEAK, or antifreeze containing the Alugard 340-2 inhibitor system.

Capacity

9.50 QTS.

8.99 L

Variant

2.6 H, Automatic

This vehicle's factory manual

1985 Dodge Conquest: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.

Open this vehicle’s service manual

Other specs:All specs

What You'll Need

Engine Coolant / Antifreeze

50/50 mixture of water and Ethylene-Glycol Base Antifreeze, such as MOPAR, PRESTON II, PEAK, or antifreeze containing the Alugard 340-2 inhibitor system. for Dodge Conquest

Search Amazon →

Tool

Related for Your 1985 Dodge Conquest

Quick Actions

🏠1985 Dodge Conquest Hub 🛠️All Repair Guides 🤖AI Diagnosis

Frequently Asked Questions

What type of coolant does a 1985 Dodge Conquest take?: The 1985 Dodge Conquest requires 50/50 mixture of water and Ethylene-Glycol Base Antifreeze, such as MOPAR, PRESTON II, PEAK, or antifreeze containing the Alugard 340-2 inhibitor system.. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the 2.6 H, Automatic configuration.
How much coolant does a 1985 Dodge Conquest hold?: The 1985 Dodge Conquest cooling system capacity is 9.50 QTS. (8.99 L).
Can I use universal coolant in my 1985 Dodge Conquest?: It is strongly recommended to use coolant that meets the 50/50 mixture of water and Ethylene-Glycol Base Antifreeze, such as MOPAR, PRESTON II, PEAK, or antifreeze containing the Alugard 340-2 inhibitor system. specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
What happens if I use the wrong coolant in my 1985 Dodge Conquest?: Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.