1985 Chevrolet CorvetteOil Type & Capacity

OEM spec from the factory service manual for the Automatic variant.

Quick Answer

Oil Type

$SAE 5W-30 (Preferred) (Below -20Deg.F to over 100Deg.F), 10W-30 (0Deg.F to over 100Deg.F), 15W-40 (10Deg.F to over 100Deg.F), 20W-20 (20Deg.F to over 100Deg.F), 30 (40Deg.F to over 100Deg.F)

Capacity (w/ Filter)

5.00 QTS.

4.73 L

Variant

Automatic

Note: Use oil that has been certified by the American Petroleum Institute.

This vehicle's factory manual

1985 Chevrolet Corvette: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.

Open this vehicle’s service manual
Sister site: See this spec on WhatTypeOfOil.com β€” our quick oil type & capacity lookup for every vehicle.

Related for Your 1985 Chevrolet Corvette

Frequently Asked Questions

What type of oil does a 1985 Chevrolet Corvette take?
The 1985 Chevrolet Corvette requires SAE 5W-30 (Preferred) (Below -20Deg.F to over 100Deg.F), 10W-30 (0Deg.F to over 100Deg.F), 15W-40 (10Deg.F to over 100Deg.F), 20W-20 (20Deg.F to over 100Deg.F), 30 (40Deg.F to over 100Deg.F). The exact spec may vary slightly by engine variant β€” this page shows the OEM recommendation for the Automatic configuration.
How much oil does a 1985 Chevrolet Corvette need?
The 1985 Chevrolet Corvette takes 5.00 QTS. (4.73 L) of engine oil with the filter replaced.
Can I use synthetic oil in my 1985 Chevrolet Corvette?
Yes β€” synthetic oil that meets the SAE 5W-30 (Preferred) (Below -20Deg.F to over 100Deg.F), 10W-30 (0Deg.F to over 100Deg.F), 15W-40 (10Deg.F to over 100Deg.F), 20W-20 (20Deg.F to over 100Deg.F), 30 (40Deg.F to over 100Deg.F) specification is acceptable and often preferred for better protection and longer change intervals.
What happens if I use the wrong oil in my 1985 Chevrolet Corvette?
Using oil that does not meet the SAE 5W-30 (Preferred) (Below -20Deg.F to over 100Deg.F), 10W-30 (0Deg.F to over 100Deg.F), 15W-40 (10Deg.F to over 100Deg.F), 20W-20 (20Deg.F to over 100Deg.F), 30 (40Deg.F to over 100Deg.F) specification can reduce engine protection, increase wear, and potentially void warranty coverage. Always use oil that meets the OEM spec.