Safety Warning
DIY auto repair can cause serious injury, fire, or vehicle damage. These guides are for informational purposes only. Always follow OEM torque specs, wear PPE, and consult a certified mechanic if you are unsure. You are solely responsible for your safety.
1983 Lincoln Mark ViCoolant Type & Capacity
OEM spec from the factory service manual for the Base, 2D Sedan variant.
Quick Answer
Coolant Type
50/50 mixture of FORD Premium Cooling System Fluid and water
Capacity
14.10 QTS.
13.34 L
Variant
Base, 2D Sedan
Note: Specification: ESE M97B44 A.
This vehicle's factory manual
1983 Lincoln Mark Vi: confirm the engine, trim, or drivetrain to open the available repair and diagnosis sections.
Other specs:All specs
What You'll Need
Related for Your 1983 Lincoln Mark Vi
Frequently Asked Questions
- What type of coolant does a 1983 Lincoln Mark Vi take?
- The 1983 Lincoln Mark Vi requires 50/50 mixture of FORD Premium Cooling System Fluid and water. The exact spec may vary slightly by engine variant — this page shows the OEM recommendation for the Base, 2D Sedan configuration.
- How much coolant does a 1983 Lincoln Mark Vi hold?
- The 1983 Lincoln Mark Vi cooling system capacity is 14.10 QTS. (13.34 L).
- Can I use universal coolant in my 1983 Lincoln Mark Vi?
- It is strongly recommended to use coolant that meets the 50/50 mixture of FORD Premium Cooling System Fluid and water specification. Universal coolants may not provide the correct corrosion protection for your engine's materials.
- What happens if I use the wrong coolant in my 1983 Lincoln Mark Vi?
- Using coolant that does not meet the OEM specification can cause corrosion, gasket damage, and overheating. Always verify the correct coolant type before topping off or flushing the system.